Ник:
Пароль:

Контакты

E-mail: info@starterkit.ru
тел.: +7 922 680-21-73
тел.: +7 922 680-21-74
Телеграм: t.me/starterkit_ru
Партнеры:
otladka.com.ua - г.Киев

Способы оплаты

User Info


Добро пожаловать,
Guest

Регистрация или входРегистрация или вход
Потеряли пароль?Потеряли пароль?

Ник:
Пароль:

ПользователейПользователей:1
Поисковых ботовПоисковых ботов:3
ГостейГостей:1

ОбновитьПодробнееВсегоВсего:5
Форум » starterkit.ru » Процессорные модули » SK-9G45-OEM
Нестабильный старт модуля
IgorT
Добавлено 08.10.2012 14:42
0
Сообщение: 1
IgorT
0

Пункты: 188
Регистрация: 07.10.2012
Продолжаю разбираться с G45-OEM.

Примерно каждый 4 запуск платы, не важно питанием или кнопкой "reset" завершается повисанием на:

Uncompressing Linux... done, booting the kernel.

Если начинает запускаться - все нормально, ядро стартует.
Если не запускается - кнопка reset не помогает ( на -MB) ,
начинает загружаться, но ровно это этого же места.
В этом случае - помогает дернуть питание.

Источник питания - нормальный, не шумит, 5.35В.

Может есть у кого-нибудь идеи, что посмотреть ?
Я опять по известным граблями иду ?
Спуститься к концу Подняться к началу
Персональная информация
Pavel Ivanchenko
Добавлено 08.10.2012 15:31 Редактировалось 08.10.2012 15:36 Сообщение: 2
Pavel Ivanchenko
Admin
4.39

Пункты: 91438
Регистрация: 24.03.2009
Пол: Мужчина
Это происходит со штатными прошивками?

Если со штатными, то не надо ничего смотреть и крутить, отправляйте модуль обратно (вместе с материнкой), будем выяснять что происходит.
Спуститься к концу Подняться к началу
Персональная информация
Jury093
Добавлено 08.10.2012 15:41 Сообщение: 3
Jury093
4.5

Пункты: 54233
Регистрация: 25.05.2009
Пол: Мужчина
Из: Санкт-Петербург
Цитата
Если не запускается - кнопка reset не помогает ( на -MB) ,

в ранних версия Bootstrap сигнал Reset был заблокирован (у меня одна из плат до сих пор не ресетится - лень перешить)..
вроде Саша писал, что пофиксил - выложите номера и даты версий сборки Bootstrap и Uboot

по теме пока ничего не скажу.. ядро заводское или самосборное?
ethernet подключен?

На любой вопрос есть любой ответ.
Спуститься к концу Подняться к началу
Персональная информация
IgorT
Добавлено 08.10.2012 23:03 Сообщение: 4
IgorT
0

Пункты: 188
Регистрация: 07.10.2012
Виноват bootloader.

Я отключил NAND и гружусь с SD.
Если взять штатный bootloader и подсунуть ему свое собранное ядро - все OK.

Я собирал вот этот:
http://sasamy.narod.ru/bootstrap30sk.tar.bz2
http://starterkit.ru/html/index.php?name=forum&op=view&id=10047&num=4#11280

C ним запуск 50\50.

Вопрос "зачем? - риторический, изучаю.
Да и неплохо бы уметь выставить GPIO сразу после подачи питания.
Спуститься к концу Подняться к началу
Персональная информация
AlexN
Добавлено 17.10.2012 07:58 Редактировалось 17.10.2012 08:01 Сообщение: 5
AlexN
0

Пункты: 2942
Регистрация: 03.03.2011
однако, что-то подобное:
например:
Код


-- AT91bootstrap Project 3.0 --
-- AT91SAM9M10-EK
-- Compiled: Oct 1 2010 17:20:18 --
-I- Setting: MCK = 133MHz
-I- I cache enabled.
-I- Init SDRAM
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9510DAEC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x10000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x800
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (262144 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000


U-Boot 2010.09 (Jan 13 2012 - 08:34:40)

DRAM: 64 MiB
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
NAND: 256 MiB





или еще:
Код

-- AT91bootstrap Project 3.0 --
-- AT91SAM9M10-EK
-- Compiled: Oct 1 2010 17:20:18 --
-I- Setting: MCK = 133MHz
-I- I cache is already enabled.
-I- Init SDRAM
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x00000000
-E- RawNandFlash_Initialize: Could not autodetect chip.
-E- Device Unknown
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x0
-I- Size in bytes of one single block of a device : 0x0
-I- Number of blocks in the entire device : 0x0
-I- Size of the data area of a page in bytes : 0x0
-I- Number of pages in the entire device : 0x0
-I- Bus width : 8
-I- Copy "" (262144 bytes) from NAND 0x00020000 to 0x73f00000
-E- TranslateAccess Error
-I- Jump to 0x73f00000


- интересный вариант - bootstrap стартует из nand, а потом эту же nand не может опознать.

дальше - останавливается в самых разных местах:
Код

-- AT91bootstrap Project 3.0 --
-- AT91SAM9M10-EK
-- Compiled: Oct 1 2010 17:20:18 --
-I- Setting: MCK = 133MHz
-I- I cache enabled.
-I- Init SDRAM
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9510DAEC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x10000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x800
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (262144 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000


U-Boot 2010.09 (Jan 13 2012 - 08:34:40)

DRAM: 64 MiB
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment

In: serial
Out: serial
Err: serial
Net: macb0
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x80000, size 0x790000



Код

-- AT91bootstrap Project 3.0 --
-- AT91SAM9M10-EK
-- Compiled: Oct 1 2010 17:20:18 --
-I- Setting: MCK = 133MHz
-I- I cache enabled.
-I- Init SDRAM
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9510DAEC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x10000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x800
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (262144 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000


U-Boot 2010.09 (Jan 13 2012 - 08:34:40)

DRAM: 64 MiB
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment

In: serial
Out: serial
Err: serial
Net: macb0
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x80000, size 0x790000
7929856 bytes read: OK
## Booting kernel from Legacy Image at 70400000 ...
Image Name: Linux Kernel Image
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 2257531 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.36-rc6 (root@debian) (gcc version 4.2.0 20070413 (prerelease) (CodeSourcery Sourcery G++ Lite 2007q1-10)) #768 Tue Feb 7 22:10:47 NOVT 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: SK-9G45-OEM
Ignoring unrecognised tag 0x54410009
Memory policy: ECC disabled, Data cache writeback
Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 ubi.mtd=1 root=ubi0:nandfs rw rootfstype=ubifs
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60276k/60276k available, 5260k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
vmalloc : 0xc4800000 - 0xfee00000 ( 934 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0085000 ( 500 kB)
.text : 0xc0085000 - 0xc0438000 (3788 kB)
.data : 0xc0454000 - 0xc04785e0 ( 146 kB)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:192
AT91: 160 gpio irqs in 5 banks
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop... 199.47 BogoMIPS (lpj=997376)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.0: using pins 52 (SDA) and 53 (SCL)
Advanced Linux Sound Architecture Driver Version 1.0.23.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource pit
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
msgmni has been set to 117
io scheduler noop registered (default)
Atmel Sterh drv init
atmel_lcdfb atmel_lcdfb.0: backlight control is not available
atmel_lcdfb atmel_lcdfb.0: 750KiB frame buffer at 73900000 (mapped at ffa00000)
Console: switching to colour frame buffer device 100x30
atmel_lcdfb atmel_lcdfb.0: fb0: Atmel LCDC at 0x00500000 (mapped at c4818000), irq 23


Код

-- AT91bootstrap Project 3.0 --
-- AT91SAM9M10-EK
-- Compiled: Oct 1 2010 17:20:18 --
-I- Setting: MCK = 133MHz
-I- I cache enabled.
-I- Init SDRAM
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9510DAEC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x10000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x800
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (262144 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000


U-Boot 2010.09 (Jan 13 2012 - 08:34:40)

DRAM: 64 MiB
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment

In: serial
Out: serial
Err: serial
Net: macb0
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x80000, size 0x790000
7929856 bytes read: OK
## Booting kernel from Legacy Image at 70400000 ...
Image Name: Linux Kernel Image
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 2257531 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Uncompressing Kernel Image ...


или вот с кучей badblocks

Код

-- AT91bootstrap Project 3.0 --
-- AT91SAM9M10-EK
-- Compiled: Oct 1 2010 17:20:18 --
-I- Setting: MCK = 133MHz
-I- I cache enabled.
-I- Init SDRAM
-I- Init DDRAM
-I- Init NAND Flash
-I- Nandflash ID is 0x9510DAEC
-I- Nandflash driver initialized
-I- Size of the whole device in bytes : 0x10000000
-I- Size in bytes of one single block of a device : 0x20000
-I- Number of blocks in the entire device : 0x800
-I- Size of the data area of a page in bytes : 0x800
-I- Number of pages in the entire device : 0x40
-I- Bus width : 8
-I- Copy "" (262144 bytes) from NAND 0x00020000 to 0x73f00000
-I- Jump to 0x73f00000


U-Boot 2010.09 (Jan 13 2012 - 08:34:40)

DRAM: 64 MiB
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash: 0 Bytes
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment

In: serial
Out: serial
Err: serial
Net: macb0
Hit any key to stop autoboot: 0

NAND read: device 0 offset 0x80000, size 0x790000
7929856 bytes read: OK
## Booting kernel from Legacy Image at 70400000 ...
Image Name: Linux Kernel Image
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 2257531 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.36-rc6 (root@debian) (gcc version 4.2.0 20070413 (prerelease) (CodeSourcery Sourcery G++ Lite 2007q1-10)) #768 Tue Feb 7 22:10:47 NOVT 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: SK-9G45-OEM
Ignoring unrecognised tag 0x54410009
Memory policy: ECC disabled, Data cache writeback
Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 ubi.mtd=1 root=ubi0:nandfs rw rootfstype=ubifs
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60276k/60276k available, 5260k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
vmalloc : 0xc4800000 - 0xfee00000 ( 934 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0085000 ( 500 kB)
.text : 0xc0085000 - 0xc0438000 (3788 kB)
.data : 0xc0454000 - 0xc04785e0 ( 146 kB)
Hierarchical RCU implementation.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:192
AT91: 160 gpio irqs in 5 banks
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop... 199.47 BogoMIPS (lpj=997376)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.0: using pins 52 (SDA) and 53 (SCL)
Advanced Linux Sound Architecture Driver Version 1.0.23.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource pit
NET: Registered protocol family 2
kmem_cache_create: Early error in slab arp_cache
kernel BUG at mm/slab.c:2180!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 805 [#1]
last sysfs file:
Modules linked in:
CPU: 0 Not tainted (2.6.36-rc6 #768)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c0089354>] lr : [<c0089350>] psr: 60000013
sp : c3819f28 ip : feffee00 fp : c0419ca4
r10: 00000000 r9 : c0478660 r8 : 00042000
r7 : a9b50080 r6 : ffff8aff r5 : c3818000 r4 : c0476014
r3 : 00000000 r2 : c045ab40 r1 : 00000a14 r0 : 00000024
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: 70004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc3818270)
Stack: (0xc3819f28 to 0xc381a000)
9f20: c0419ca4 c00e9070 c385f790 c009dd18 c3819f50 c385f790
9f40: 00000000 c009dd18 00000002 c00841fc 00000002 c0476014 00000001 ffff8aff
9f60: c3818000 00000000 c0478660 c001ea30 00000000 c02c403c 00000000 c0493a4c
9f80: c0476014 00000000 c04766a4 c02c4088 c0476014 c001e66c c04766a4 c001eb24
9fa0: c00225d8 c00228a0 c00224b0 c0085474 c3813d80 393144f8 00000031 00000000
9fc0: 00000000 c00225d8 c00228a0 c00224b0 00000013 00000000 00000000 00000000
9fe0: 00000000 c00088cc 00000000 c0008830 c0086e10 c0086e10 b082a002 212286a8
[<c0089354>] (__bug+0x1c/0x28) from [<c00e9070>] (kmem_cache_create+0x68/0x4b4)
[<c00e9070>] (kmem_cache_create+0x68/0x4b4) from [<c02c403c>] (neigh_table_init_no_netlink+0x160/0x1a0)
[<c02c403c>] (neigh_table_init_no_netlink+0x160/0x1a0) from [<c02c4088>] (neigh_table_init+0xc/0x7c)
[<c02c4088>] (neigh_table_init+0xc/0x7c) from [<c001e66c>] (arp_init+0x10/0x48)
[<c001e66c>] (arp_init+0x10/0x48) from [<c001eb24>] (inet_init+0xf4/0x218)
[<c001eb24>] (inet_init+0xf4/0x218) from [<c0085474>] (do_one_initcall+0x124/0x184)
[<c0085474>] (do_one_initcall+0x124/0x184) from [<c00088cc>] (kernel_init+0x9c/0x14c)
[<c00088cc>] (kernel_init+0x9c/0x14c) from [<c0086e10>] (kernel_thread_exit+0x0/0x8)
Code: e1a01000 e59f000c eb003cc9 e3a03000 (e5833000)
---[ end trace 60f60b23e6fa95d6 ]---
Kernel panic - not syncing: Attempted to kill init!
[<c008b504>] (unwind_backtrace+0x0/0xf4) from [<c0097840>] (panic+0x58/0x1b0)
[<c0097840>] (panic+0x58/0x1b0) from [<c009ad00>] (do_exit+0x5f0/0x624)
[<c009ad00>] (do_exit+0x5f0/0x624) from [<c00897ec>] (die+0x190/0x1b8)
[<c00897ec>] (die+0x190/0x1b8) from [<c008c330>] (__do_kernel_fault+0x64/0x84)
[<c008c330>] (__do_kernel_fault+0x64/0x84) from [<c008c488>] (do_page_fault+0x138/0x1dc)
[<c008c488>] (do_page_fault+0x138/0x1dc) from [<c00852ec>] (do_DataAbort+0x38/0x9c)
[<c00852ec>] (do_DataAbort+0x38/0x9c) from [<c0085a0c>] (__dabt_svc+0x4c/0x60)
Exception stack(0xc3819ee0 to 0xc3819f28)
9ee0: 00000024 00000a14 c045ab40 00000000 c0476014 c3818000 ffff8aff a9b50080
9f00: 00042000 c0478660 00000000 c0419ca4 feffee00 c3819f28 c0089350 c0089354
9f20: 60000013 ffffffff
[<c0085a0c>] (__dabt_svc+0x4c/0x60) from [<c0089354>] (__bug+0x1c/0x28)
[<c0089354>] (__bug+0x1c/0x28) from [<c00e9070>] (kmem_cache_create+0x68/0x4b4)
[<c00e9070>] (kmem_cache_create+0x68/0x4b4) from [<c02c403c>] (neigh_table_init_no_netlink+0x160/0x1a0)
[<c02c403c>] (neigh_table_init_no_netlink+0x160/0x1a0) from [<c02c4088>] (neigh_table_init+0xc/0x7c)
[<c02c4088>] (neigh_table_init+0xc/0x7c) from [<c001e66c>] (arp_init+0x10/0x48)
[<c001e66c>] (arp_init+0x10/0x48) from [<c001eb24>] (inet_init+0xf4/0x218)
[<c001eb24>] (inet_init+0xf4/0x218) from [<c0085474>] (do_one_initcall+0x124/0x184)
[<c0085474>] (do_one_initcall+0x124/0x184) from [<c00088cc>] (kernel_init+0x9c/0x14c)
[<c00088cc>] (kernel_init+0x9c/0x14c) from [<c0086e10>] (kernel_thread_exit+0x0/0x8)


такое ощущение, что нестабильно рабоает NAND (может с таймингами чего-то)

гружусь с SD - нормально, гоняю тест памяти 2 часа - номально. Пытаюсь загрузиться с NAND - грузится падла. Может прогрелось чего?

из досадного - таких плат несколько - у одной демоны самоликвидировались (надолго ли?), одна запаяна в свою "материнку" (вследствие ограничений по высоте в конечном изделии), и одна в первозданном виде - как при поставке.
И еще - все платы при получении грузились с 1 раза, на них прогнал тест памяти в чечение примерно 1 часа, ошибок не было. И вот, "отлежались"...

на ftp лежит вроде как более свежий bootstrap, попробую...
Спуститься к концу Подняться к началу
Персональная информация
Pavel Ivanchenko
Добавлено 17.10.2012 10:16 Сообщение: 6
Pavel Ivanchenko
Admin
4.39

Пункты: 91438
Регистрация: 24.03.2009
Пол: Мужчина
Надеюсь, речь идет о экспериментах со штатными прошивками и на нашей материнской плате (без своих обвесов)?
Тогда можете отправить нам экземпляр - самому интересно на такое взглянуть.
Спуститься к концу Подняться к началу
Персональная информация
alexmfivt
Добавлено 19.02.2013 04:20 Редактировалось 21.02.2013 10:50 Сообщение: 7
alexmfivt
0

Пункты: 3237
Регистрация: 07.11.2010
Пол: Мужчина
Из: Красноярск
вот и у меня на на плате своей разработки такая беда. 2 одинаковых платы - одна работает. а вторая корневую обновить никак не может: либо kernel bug at mm/slab.c, либо ошибка в tar архиве.

что может быть?

лог обновления корневой прилагаю
Код


./usr/lib/libpng12.so
./usr/lib/libasound.so.2
./usr/lib/libts.so
./usr/lib/libpcap.so.1.0.0
kernel BUG at mm/slab.c:3057!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 817 [#1]
last sysfs file: /sys/devices/virtual/ubi/ubi0/ubi0_0/name
Modules linked in:
CPU: 0 Not tainted (2.6.36-rc6 #276)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c0497354>] lr : [<c0497350>] psr: 20000093
sp : c17efcc0 ip : feffee00 fp : 00008050
r10: c2c021e0 r9 : 00000007 r8 : c2c002a0
r7 : c17f409c r6 : c2c05e00 r5 : 00000021 r4 : c17f4080
r3 : 00000000 r2 : 00000001 r1 : 000035e3 r0 : 00000024
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: 717e8000 DAC: 00000017
Process flush-ubifs_0_0 (pid: 966, stack limit = 0xc17ee270)
Stack: (0xc17efcc0 to 0xc17f0000)
fcc0: 00000000 c04f5fd4 c17a4950 000006ed 00008050 c2c002a0 60000013 c1782000
fce0: 00000007 c018d780 c1782000 c04f64a4 00000000 000006ed 20000002 c17a4910
fd00: 00000302 c05660c4 c018d780 c1782000 c17ee000 c17efd60 c152c000 c38c49a0
fd20: 00000000 c38c49a0 c17a4910 000006ed 20000002 c17a4910 00000302 c1782000
fd40: 000010c8 000000de c1782180 c056a7d0 0000005a 00000000 00000000 00000000
fd60: 000006ed 20000002 00000000 000000de 000010c8 00000302 c018d780 00000006
fd80: c17efdc0 000008b9 c152c000 c17a4910 00000302 c1782000 c17efdf8 00000000
fda0: 000000de c0556d10 00000302 c1782040 00000080 c07d0918 c084cca0 000010c8
fdc0: 000002d2 00000001 c1782008 000008b9 c084cca0 c2a7bdf8 c1782000 00000002
fde0: 000006ed c07e5000 c17eff18 c0559bb0 000008b9 00000000 000006ed 20000002
fe00: c2a7be98 00000002 c17efe5c 00000003 00000003 c2a7be98 ffffffff c04dacf4
fe20: c084cca0 c04db198 0000000e c16ab7a0 c2a7be98 c04dace0 00000000 00000000
fe40: 00000000 00000001 00000000 00000000 c1782000 00000003 00000000 c084cc60
fe60: c084cc80 c084cca0 c084b0a0 c084b0c0 c084b0e0 c084b900 c084b920 c084b940
fe80: c084b960 c084b980 c084c080 c084c0a0 c084b2a0 00000003 c2989da0 c2a7bdf8
fea0: c17eff18 c2a7be98 c17eff18 c2a7be1c 00000000 c17a4600 00000000 c05145d4
fec0: 00000000 c2a7bdf8 c1782060 c17eff18 c1782098 c0514a44 c2a6c6c8 c17a4600
fee0: c1782060 c17a4640 c1782098 00000000 c17eff18 c0514c60 c07ba760 00000000
ff00: c15107c0 c1782060 00000000 c1782060 00000000 c0514eb8 00000000 00000000
ff20: fffff1c3 00000214 00000000 00000000 00000000 00000000 00000000 00000000
ff40: 00000028 00000000 00000001 00000833 00000419 c2cbcbc0 c2c5c6b0 c15107c0
ff60: 00000000 c1782008 c17820a8 c0514fa0 00000015 c2c5c680 c07b2420 c04c09e4
ff80: c2cbcbc0 c1799e20 c17effac c06d6eac c1782060 00000000 c17ee000 c1782008
ffa0: c17820a8 00000000 c07b3878 c0515504 c2cb7f20 c2cb7f20 c1782060 c051549c
ffc0: 00000013 00000000 00000000 c04bc360 00000000 00000000 c1782060 00000000
ffe0: c17effe0 c17effe0 c2cb7f20 c04bc2e0 c0494e10 c0494e10 ffffffff ffffffff
[<c0497354>] (__bug+0x1c/0x28) from [<c04f5fd4>] (cache_alloc_refill+0x1c0/0x59c)
[<c04f5fd4>] (cache_alloc_refill+0x1c0/0x59c) from [<c04f64a4>] (__kmalloc+0xf4/0x104)
[<c04f64a4>] (__kmalloc+0xf4/0x104) from [<c05660c4>] (tnc_insert+0xac/0x6ec)
[<c05660c4>] (tnc_insert+0xac/0x6ec) from [<c056a7d0>] (ubifs_tnc_add+0xfc/0x188)
[<c056a7d0>] (ubifs_tnc_add+0xfc/0x188) from [<c0556d10>] (ubifs_jnl_write_data+0x1d0/0x30c)
[<c0556d10>] (ubifs_jnl_write_data+0x1d0/0x30c) from [<c0559bb0>] (do_writepage+0x118/0x208)
[<c0559bb0>] (do_writepage+0x118/0x208) from [<c04dacf4>] (__writepage+0x14/0x64)
[<c04dacf4>] (__writepage+0x14/0x64) from [<c04db198>] (write_cache_pages+0x1c4/0x390)
[<c04db198>] (write_cache_pages+0x1c4/0x390) from [<c05145d4>] (writeback_single_inode+0xa0/0x214)
[<c05145d4>] (writeback_single_inode+0xa0/0x214) from [<c0514a44>] (writeback_sb_inodes+0xac/0x120)
[<c0514a44>] (writeback_sb_inodes+0xac/0x120) from [<c0514c60>] (writeback_inodes_wb+0xa4/0x104)
[<c0514c60>] (writeback_inodes_wb+0xa4/0x104) from [<c0514eb8>] (wb_writeback+0x1f8/0x258)
[<c0514eb8>] (wb_writeback+0x1f8/0x258) from [<c0514fa0>] (wb_do_writeback+0x88/0x1c0)
[<c0514fa0>] (wb_do_writeback+0x88/0x1c0) from [<c0515504>] (bdi_writeback_thread+0x68/0x14c)
[<c0515504>] (bdi_writeback_thread+0x68/0x14c) from [<c04bc360>] (kthread+0x80/0x88)
[<c04bc360>] (kthread+0x80/0x88) from [<c0494e10>] (kernel_thread_exit+0x0/0x8)
Code: e1a01000 e59f000c eb003cd1 e3a03000 (e5833000)
---[ end trace 60dafcd63c744b64 ]---
Спуститься к концу Подняться к началу
Персональная информация
alexmfivt
Добавлено 19.02.2013 04:37 Редактировалось 21.02.2013 10:51 Сообщение: 8
alexmfivt
0

Пункты: 3237
Регистрация: 07.11.2010
Пол: Мужчина
Из: Красноярск
или вот так еще после прогрева феном нанда и ддр

Код

./usr/lib/libts-0.0.so.0
./usr/lib/liboil-0.3.a
./usr/lib/libgmodule-2.0.la
./usr/lib/libxml2.a
./usr/lib/libz.so.1.2.5
./usr/lib/libglib-2.0.a
UBIFS assert failed in ubifs_search_zbranch at 143 (pid 968)
[<c0499504>] (unwind_backtrace+0x0/0xf4) from [<c0587218>] (ubifs_search_zbranch+0x260/0x27c)
[<c0587218>] (ubifs_search_zbranch+0x260/0x27c) from [<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc)
[<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc) from [<c05692dc>] (ubifs_tnc_locate+0x3c/0x164)
[<c05692dc>] (ubifs_tnc_locate+0x3c/0x164) from [<c0559224>] (do_readpage+0x154/0x52c)
[<c0559224>] (do_readpage+0x154/0x52c) from [<c0559638>] (ubifs_readpage+0x3c/0x49c)
[<c0559638>] (ubifs_readpage+0x3c/0x49c) from [<c04d5abc>] (generic_file_aio_read+0x1f4/0x778)
[<c04d5abc>] (generic_file_aio_read+0x1f4/0x778) from [<c04f8ff8>] (do_sync_read+0xa0/0xe8)
[<c04f8ff8>] (do_sync_read+0xa0/0xe8) from [<c04f98b0>] (vfs_read+0xb0/0x144)
[<c04f98b0>] (vfs_read+0xb0/0x144) from [<c04f9be8>] (sys_read+0x3c/0x6c)
[<c04f9be8>] (sys_read+0x3c/0x6c) from [<c0493de0>] (ret_fast_syscall+0x0/0x2c)
UBIFS assert failed in ubifs_search_zbranch at 163 (pid 968)
[<c0499504>] (unwind_backtrace+0x0/0xf4) from [<c05871d0>] (ubifs_search_zbranch+0x218/0x27c)
[<c05871d0>] (ubifs_search_zbranch+0x218/0x27c) from [<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc)
[<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc) from [<c05692dc>] (ubifs_tnc_locate+0x3c/0x164)
[<c05692dc>] (ubifs_tnc_locate+0x3c/0x164) from [<c0559224>] (do_readpage+0x154/0x52c)
[<c0559224>] (do_readpage+0x154/0x52c) from [<c0559638>] (ubifs_readpage+0x3c/0x49c)
[<c0559638>] (ubifs_readpage+0x3c/0x49c) from [<c04d5abc>] (generic_file_aio_read+0x1f4/0x778)
[<c04d5abc>] (generic_file_aio_read+0x1f4/0x778) from [<c04f8ff8>] (do_sync_read+0xa0/0xe8)
[<c04f8ff8>] (do_sync_read+0xa0/0xe8) from [<c04f98b0>] (vfs_read+0xb0/0x144)
[<c04f98b0>] (vfs_read+0xb0/0x144) from [<c04f9be8>] (sys_read+0x3c/0x6c)
[<c04f9be8>] (sys_read+0x3c/0x6c) from [<c0493de0>] (ret_fast_syscall+0x0/0x2c)
UBIFS assert failed in ubifs_search_zbranch at 143 (pid 968)
[<c0499504>] (unwind_backtrace+0x0/0xf4) from [<c0587218>] (ubifs_search_zbranch+0x260/0x27c)
[<c0587218>] (ubifs_search_zbranch+0x260/0x27c) from [<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc)
[<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc) from [<c05692dc>] (ubifs_tnc_locate+0x3c/0x164)
[<c05692dc>] (ubifs_tnc_locate+0x3c/0x164) from [<c0559224>] (do_readpage+0x154/0x52c)
[<c0559224>] (do_readpage+0x154/0x52c) from [<c0559638>] (ubifs_readpage+0x3c/0x49c)
[<c0559638>] (ubifs_readpage+0x3c/0x49c) from [<c04d5abc>] (generic_file_aio_read+0x1f4/0x778)
[<c04d5abc>] (generic_file_aio_read+0x1f4/0x778) from [<c04f8ff8>] (do_sync_read+0xa0/0xe8)
[<c04f8ff8>] (do_sync_read+0xa0/0xe8) from [<c04f98b0>] (vfs_read+0xb0/0x144)
[<c04f98b0>] (vfs_read+0xb0/0x144) from [<c04f9be8>] (sys_read+0x3c/0x6c)
[<c04f9be8>] (sys_read+0x3c/0x6c) from [<c0493de0>] (ret_fast_syscall+0x0/0x2c)
UBIFS assert failed in ubifs_search_zbranch at 163 (pid 968)
[<c0499504>] (unwind_backtrace+0x0/0xf4) from [<c05871d0>] (ubifs_search_zbranch+0x218/0x27c)
[<c05871d0>] (ubifs_search_zbranch+0x218/0x27c) from [<c0567f20>] (ubifs_lookup_level0+0x6c/0x2dc)
...
[<c04f8ff8>] (do_sync_read+0xa0/0xe8) from [<c04f98b0>] (vfs_read+0xb0/0x144)
[<c04f98b0>] (vfs_read+0xb0/0x144) from [<c04f9be8>] (sys_read+0x3c/0x6c)
[<c04f9be8>] (sys_read+0x3c/0x6c) from [<c0493de0>] (ret_fast_syscall+0x0/0x2c)
tar: short read
#
Спуститься к концу Подняться к началу
Персональная информация
alexmfivt
Добавлено 21.02.2013 10:52 Сообщение: 9
alexmfivt
0

Пункты: 3237
Регистрация: 07.11.2010
Пол: Мужчина
Из: Красноярск
уже и NAND перепаяли, не помогает - та же беда.
Спуститься к концу Подняться к началу
Персональная информация
alexmfivt
Добавлено 25.02.2013 03:27 Сообщение: 10
alexmfivt
0

Пункты: 3237
Регистрация: 07.11.2010
Пол: Мужчина
Из: Красноярск
может есть идеи?
Спуститься к концу Подняться к началу
Персональная информация
Форум » starterkit.ru » Процессорные модули » SK-9G45-OEM